Work History

• 4/2020 - 7/2020

  Malec Bros Transport

  MC B-Double Driver: Mc log truck bdouble driver from vic to nsw and back

  ---

• 5/2019 - 11/2019

  Qube Logistics Pty Ltd

  MC b double driver: Driving bdouble doing sugarcane

  ---

• 5/2018 - 11/2018

  Brasti pty ltd

  Truck & Dog Driver: Truck and dog driver Posies track driver Laborer

  ---

• 3/2017 - 12/2017

  BKM Contracting Pty Ltd

  Tipper driver: Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned. Collect delivery instructions from appropriate sources, verifying instructions and routes. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials. Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers. Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs. Collaborate with other drivers as part of a driving team on some trips.

  ---

• 6/2016 - 3/2017

  Ontrack Earthworks Pty Ltd

  Tipper Driver: Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order. Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned. Collect delivery instructions from appropriate sources, verifying instructions and routes. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials. Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers. Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs. Read and interpret maps to determine vehicle routes. Collaborate with other drivers as part of a driving team on some trips.

  ---

• 2/2013 - 6/2016

  Star haulage services pty Ltd

  Tipper Driver: Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order. Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned. Collect delivery instructions from appropriate sources, verifying instructions and routes. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials. Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers. Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs. Read and interpret maps to determine vehicle routes.

  ---

• 7/2012 - 12/2012

  Vicroads

  Trainee environmental officer: Collect, synthesize, analyze, manage, and report environmental data, such as pollution emission measurements, atmospheric monitoring measurements, meteorological or mineralogical information, or soil or water samples. Analyze data to determine validity, quality, and scientific significance and to interpret correlations between human activities and environmental effects. Process and review environmental permits, licenses, or related materials. Investigate and report on accidents affecting the environment.

  ---

• 1/2009 - 11/2009

  FRONTLINE INDUSTRIES

  Builders Labourer: Clean or prepare construction sites to eliminate possible hazards. Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials. Read plans, instructions, or specifications to determine work activities. Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications. Measure, mark, or record openings or distances to layout areas where construction work will be performed. Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes. Mix ingredients to create compounds for covering or cleaning surfaces. Mix, pour, or spread concrete, using portable cement mixers. Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt. Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures. Provide assistance to craft workers, such as carpenters, plasterers, or masons. Position, join, align, or seal structural components, such as concrete wall sections or pipes.

  ---

• 1/2006 - 12/2007

  Streamline Construction

  Builder's Labourer: STREAMLINE CONSTRUCTIONS Richmond, NSW Control traffic passing near, in, or around work zones. Clean or prepare construction sites to eliminate possible hazards. Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials. Read plans, instructions, or specifications to determine work activities. Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications. Measure, mark, or record openings or distances to layout areas where construction work will be performed. Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment. Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes. Operate or maintain air monitoring or other sampling devices in confined or hazardous environments. Mix ingredients to create compounds for covering or cleaning surfaces. Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt. Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt. Mix, pour, or spread concrete, using portable cement mixers. Grind, scrape, sand, or polish surfaces such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines. Lubricate, clean, or repair machinery, equipment, or tools. Provide assistance to craft workers, such as carpenters, plasterers, or masons. Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts. Position, join, align, or seal structural components, such as concrete wall sections or pipes. Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools. Apply caulking compounds by hand or caulking guns to protect against entry of water or air. Spray materials such as water, sand, steam, vinyl, paint, or stucco through hoses to clean, coat, or seal surfaces. Transport or set explosives for tunnel, shaft, or road construction. Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials. Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations. Use computers or other input devices to control robotic pipe cutters or cleaners.

  ---